Royal Panda roulette

Author Topic: Roulette Computers  (Read 461 times)

0 Members and 1 Guest are viewing this topic.

Mister Eko

  • New
  • **
  • Posts: 31
  • Thanked: 9 times
Roulette Computers
« on: July 13, 2017, 09:09:21 PM »
What is your opinions about the a gadget, that predicts roulette numbers? You buy this, adjust the settings of the wheel, the speed, etc., and this mini gadget vibrate, where to place the bet, on which numbers. This is a simple bulls***, or an existing and usuful thing?


 

MrPerfect.

  • Hero Member
  • ******
  • Posts: 1193
  • Thanked: 678 times
Re: Roulette Computers
« Reply #1 on: July 13, 2017, 11:41:18 PM »
 It is possible to create such a thing.
    Many tried and fail,  some managed to do it right...
   In short, main qwestion here is if you personally  would be able to operate one. There is series of problems related to creation and operation of such a device... clicking mistakes, for example.
    If l didn't made my own, l would use Jafco gadget.
   You can look on YouTube a demo l made... type "vbroulettecomputer"  without ("").
    You can try also something like "Jafco roulette computer" or "Jafco pred8"
     Avoid anything sold by Forester, it's a scam.
 
The following users thanked this post: Mister Eko

shapecode99

  • New
  • **
  • Posts: 31
  • Thanked: 5 times
Re: Roulette Computers
« Reply #2 on: July 14, 2017, 07:29:32 AM »
even if you have those micro gadgets... its hard to to use it on the table.
also... could make a lot of mistakes on clicking and will tend to lose in the end..

computers are good, but risky on battle. only good when it used on own wheel at home.
 
The following users thanked this post: Mister Eko

MrPerfect.

  • Hero Member
  • ******
  • Posts: 1193
  • Thanked: 678 times
Re: Roulette Computers
« Reply #3 on: July 14, 2017, 11:32:33 AM »
even if you have those micro gadgets... its hard to to use it on the table.
    Not necessarily.  It's a microgadget, obviously you have to think how to hide it... but it's not so difficult due to zise.
Quote
also... could make a lot of mistakes on clicking and will tend to lose in the end..

There is a real need to make an algorithm for error correction, player has to realise his capabilities as well. It's not just " one click solution" , but the tool. Efficiency will depend on proficiency.
 
Quote
computers are good, but risky on battle. only good when it used on own wheel at home.
Computers do not know on wich wheel they are being used, they see no difference between home wheel or casino one.
    Such a computer will be as good as it's algorithm  ( software) plus hardware limitations , if any. It can do only as good as his programming allow.
     In general, player need to be able to win first, then think how to simplify his life with the use of such a gadget.
« Last Edit: July 14, 2017, 11:37:58 AM by MrPerfect. »
 

shapecode99

  • New
  • **
  • Posts: 31
  • Thanked: 5 times
Re: Roulette Computers
« Reply #4 on: July 14, 2017, 11:55:39 AM »
have you got one Mr. P? or have you tried it and used it on a live casino?

 
The following users thanked this post: MrPerfect.

MrPerfect.

  • Hero Member
  • ******
  • Posts: 1193
  • Thanked: 678 times
Re: Roulette Computers
« Reply #5 on: July 14, 2017, 12:30:22 PM »
 Yes. And yes. I have built a roulette computer from the scratch  ( on hardware and software level) for personal use...  l was even thinking to comercialise it, but lm not that good in website developing or marketing. 
    You can type " vbroulettecomputer" on YouTube without ("") for a demo. Someday l fix my wheel and will do proper demonstration, but for now to busy playing...

   
 

dobbelsteen

  • Hero Member
  • ******
  • Posts: 1465
  • Thanked: 436 times
Re: Roulette Computers
« Reply #6 on: July 24, 2017, 09:26:48 AM »
The wheel velocity of the Camegh roulette is slacked down by a computer. This also possible with a real roulette. In that case all devices for predicting the result of a spin will fail. 
 

MrPerfect.

  • Hero Member
  • ******
  • Posts: 1193
  • Thanked: 678 times
Re: Roulette Computers
« Reply #7 on: July 24, 2017, 10:53:44 AM »
Are you familiar with all devices in and out of the market ?  To make such a statement you have to be.
 

Trilobite

  • Mature Member
  • ***
  • Posts: 339
  • Thanked: 121 times
Re: Roulette Computers
« Reply #8 on: July 24, 2017, 12:34:12 PM »
Micro adjustments, both speeding and slowing of the wheel throughout the spin duration have the ability to reduce the accuracy of roulette computers.

Learning to spot wheel bias seems the better option.

Even so, I think if manufacturers and casinos could including computerised wheel tilt adjustments in real time, then all the AP guys whether they be computer users or visual ballistic or bias spotters, would all be in trouble.

System players would be unaffected, of course.
 

MrPerfect.

  • Hero Member
  • ******
  • Posts: 1193
  • Thanked: 678 times
Re: Roulette Computers
« Reply #9 on: July 24, 2017, 01:01:13 PM »
 Defect spotting is always good to know.
     Tilt only marginally affect bias, if you know how to play it ,and not nessesarely affects vb. Adjustable leveling of wheels already exists,  up till now it's not a problem for a player, rather benefit.
    You shouldn't speak about roulette computers or RRS devices  if you don't know how they work.  Obviously RRS could be a problem for a novice player, but these who already have some experience do know how to deal with it. I'll tell you more, many of the wheels online l simply couldn't beat without RRS presence, in fact, it's a god sent device wich is very helpful. In some modes of its operation it removes nessesety of rotor speed assessment, in others removes nessesety to predict visually. Obviously it's all specific cases, but without RRS, such methods of " prediction"  wouldn't be possible at all.
 

Trilobite

  • Mature Member
  • ***
  • Posts: 339
  • Thanked: 121 times
Re: Roulette Computers
« Reply #10 on: July 24, 2017, 02:50:18 PM »
I'm talking about adjustable un-levelling of wheels.
 

MrPerfect.

  • Hero Member
  • ******
  • Posts: 1193
  • Thanked: 678 times
Re: Roulette Computers
« Reply #11 on: July 24, 2017, 03:41:44 PM »
Then perhaps you could explain how it could be beneficial for casinos? Or even better , form a patent,  sell it.  Ifor you create such a device and implement it, l will send you box of good vine.
 

Real

  • Fighting the war on absurdity one foolish idea at a time.
  • Hero Member
  • ******
  • Posts: 1416
  • Thanked: 211 times
  • Gender: Male
Re: Roulette Computers
« Reply #12 on: July 24, 2017, 05:40:10 PM »
Quote
The wheel velocity of the Camegh roulette is slacked down by a computer. This also possible with a real roulette. In that case all devices for predicting the result of a spin will fail.

  The RRS system is really nothing more than a gimmick.  It's about as beneficial to the casino as a screen door is to a submarine.  It actually introduces more problems with the wheel than it solves.